Persistence with Queues

12 Minute Read

This tutorial builds on the basic concepts introduced in the publish/subscribe tutorial, and will show you how to send and receive Persistent (Guaranteed) Messages from a Solace message router queue in a point to point fashion.


This tutorial assumes the following:

  • You are familiar with Solace core concepts.
  • You have access to Solace messaging with the following configuration details:

    • Connectivity information for a Solace message-VPN
    • Enabled client username and password

One simple way to get access to Solace messaging quickly is to create a messaging service in Solace Cloud as outlined here. You can find other ways to get access to Solace messaging below.


The goal of this tutorial is to understand the following:

  1. How to send a guaranteed message to a Solace queue
  2. How to bind to this queue and receive a guaranteed message

Get Solace Messaging

This tutorial requires access Solace PubSub+ messaging and requires that you know several connectivity properties about your Solace messaging. Specifically you need to know the following:

Resources Value Description
Host String This is the address clients use when connecting to the PubSub+ messaging to send and receive messages. (Format: DNS_NAME:Port or IP:Port)
Message VPN String The PubSub+ message router Message VPN that this client should connect to.
Client Username String The client username. (See Notes below)
Client Password String The client password. (See Notes below)

There are several ways you can get access to PubSub+ Messaging and find these required properties.

Option 1: Use PubSub+ Cloud

  • Follow these instructions to quickly spin up a cloud-based PubSub+ messaging service for your applications.
  • The messaging connectivity information is found in the service details in the connectivity tab (shown below). You will need:

    • Host:Port (use the SMF URI)
    • Message VPN
    • Client Username
    • Client Password
Screenshot: Messaging Connectivity Information

Option 2: Start a PubSub+ Software

  • Follow these instructions to start the PubSub+ Software in leading Clouds, Container Platforms or Hypervisors. The tutorials outline where to download and how to install the PubSub+ Software.

  • The messaging connectivity information are the following:

    • Host: <public_ip> (IP address assigned to the VMR in tutorial instructions)

    • Message VPN: default

    • Client Username: sampleUser (can be any value)

    • Client Password: samplePassword (can be any value)

      Note: By default, the PubSub+ Software "default" message VPN has authentication disabled.

Option 3: Get access to a PubSub+ Appliance

  • Contact your PubSub+ appliance administrators and obtain the following:

    • A PubSub+ Message-VPN where you can produce and consume direct and persistent messages
    • The host name or IP address of the Solace appliance hosting your Message-VPN
    • A username and password to access the Solace appliance

Obtaining the Solace PubSub+ API

The repository where this tutorial reside already comes with C API library version However, you should always check for any newer version for download here. The C API is distributed as a gzipped tar file for all supported platform. To update to a newer version of the API, please ensure that the existing core library components are appropriately replaced by the newer components.

Prerequisite Creating a Durable Queue on the Solace message router

A difference with the publish/subscribe tutorial is that for guaranteed messaging a physical endpoint resource – a durable queue, associated with the queue destination – needs to be created on the Solace message router, which will persist the messages until consumed.

You can use Solace PubSub+ Manager, SEMP or CLI to create a durable queue. This tutorial assumes that the queue named tutorial/queue has been created. Ensure the queue is enabled for both Incoming and Outgoing messages and set the Permission to at least "Consume".

Loading and Initializing the Solace JavaScript API

To load the Solace Web Messaging API for JavaScript on your HTML page simply include the solclient.js file from the distribution.

     <script src="../../../lib/solclient.js"></script>

Use the debug version of the API in lib/solclient-debug.js file instead, if you’re planning to see console log messages and/or debug it.

    <script src="../../../lib/solclient-debug.js"></script>

Then initialize the SolclientFactory, which is the first entry point to the API. Add the following to initialize with the latest version10 behavior profile to run with the default property values that Solace recommends at the time of the version 10 release.

var factoryProps = new solace.SolclientFactoryProperties();
factoryProps.profile = solace.SolclientFactoryProfiles.version10;

If the debug version of the API has been loaded the required level of logging can be set like so:


Implementing Guaranteed Messaging

For guaranteed messaging, we will use a "producer" to send messages to and a "consumer" to receive messages from a durable queue configured on the Solace message router. The producer will use a MessagePublisher embedded into the Session object to send, and the consumer will bind to a queue destination and use a MessageConsumer object to receive guaranteed messages.

Connecting to the Solace message router

Similar to the publish/subscribe tutorial, an application must connect a Solace session. The Solace session is the basis for all client communication with the Solace message router.

The solace.SolclientFactory is used to create a Solace Session from SessionProperties.

The following is an example of a session creating and connecting to the Solace message router for the producer.

Compared to the publish/subscribe tutorial, here it is not required to specify a message event listener for the Session object. Guaranteed messages are delivered to event listeners defined for the MessageConsumer object instead.

// create session
producer.session = solace.SolclientFactory.createSession({
    // solace.SessionProperties
    url:      hosturl,
    vpnName:  vpn,
    userName: username,
    password: pass,
// define session event listeners
    /*...see section Session Events...*/
// connect the session
try {
} catch (error) {

At this point your JavaScript application is connected as a client to the Solace message router. You can use PubSub+ Manager to view this client connection and related details.

Session Events

The Solace JavaScript API communicates changes in status and results of connect calls through emitting session events with certain event names.

It is necessary to wire your application logic to session events through listeners to take appropriate action. The most important session events are:

  • SessionEventCode.UP_NOTICE: session has been successfully connected to the Solace message router
  • SessionEventCode.CONNECT_FAILED_ERROR: unable to connect to the Solace message router
  • SessionEventCode.DISCONNECTED: session has been disconnected from the Solace message router

This is how event listeners can be defined in the sample producer, and the sample consumer is very similar:

// define session event listeners
producer.session.on(solace.SessionEventCode.UP_NOTICE, function (sessionEvent) {
    producer.log('=== Successfully connected and ready to send messages. ===');
producer.session.on(solace.SessionEventCode.CONNECT_FAILED_ERROR, function (sessionEvent) {
    producer.log('Connection failed to the message router: ' + sessionEvent.infoStr +
        ' - check correct parameter values and connectivity!');
producer.session.on(solace.SessionEventCode.DISCONNECTED, function (sessionEvent) {
    if (producer.session !== null) {

        producer.session = null;

Note that the application logic can be triggered only after receiving the solace.SessionEventCode.UP_NOTICE event.

Sending a message to a queue

Now it is time to send a message to the queue. Remember that the queue must be pre-configured on the message router as described in the "Creating a Durable Queue" section.

Diagram: Sending a Message to a Queue

In the simplest case, the actual method calls to create and send guaranteed messages to a queue are similar to those used for direct messages in the publish/subscribe tutorial. The differences are:

  • a durable queue type destination is created and used; and
  • the delivery mode is set to PERSISTENT.
  • delivery to the Solace message router is confirmed (shown in the Confirmed Delivery tutorial.
var messageText = 'Sample Message';
var message = solace.SolclientFactory.createMessage();
producer.log('Sending message "' + messageText + '" to queue "' + producer.queueName + '"...');
try {
    // Delivery not yet confirmed. See ConfirmedPublish.js
    producer.log('Message sent.');
} catch (error) {

The message is transferred to the Solace message router asynchronously, but if all goes well, it will be waiting for your consumer on the queue. The Confirmed Delivery tutorial shows how to make sure it gets there.

Receiving a message from a queue

Now it is time to receive the messages sent to your queue.

Diagram: Receiving a Message from a Queue

Receiving guaranteed messages is different from the direct messaging case described in the the publish/subscribe tutorial.

To receive guaranteed messages, a connected Session is used to create a Solace MessageConsumer object from MessageConsumerProperties and then connected, meaning that it will bind to the queue on the message router and can start receiving messages.

// Create message consumer
consumer.messageConsumer = consumer.session.createMessageConsumer({
    // solace.MessageConsumerProperties
    queueDescriptor: { name: consumer.queueName, type: solace.QueueType.QUEUE },
    acknowledgeMode: solace.MessageConsumerAcknowledgeMode.CLIENT, // Enabling Client ack
// define message consumer event listeners
    /*...see section Message Consumer Events...*/
// define message received event listener
    /*...see section Message Consumer Message Received Event...*/
// connect the message consumer
try {
} catch (error) {

Notice that here we use the Solace "Client acknowledgement mode", which allows the consumers to acknowledge each message individually. You can learn more about acknowledgement modes in the Solace Documentation – Acknowledging Messages Received by Clients.

    acknowledgeMode: solace.MessageConsumerAcknowledgeMode.CLIENT, // Enabling Client ack

Message Consumer Events

Message consumer related events will be sent to the event listeners defined for the MessageConsumer. The most important events are:

  • MessageConsumerEventName.UP: the message consumer has successfully bound to the destination and ready to receive messages
  • MessageConsumerEventName.CONNECT_FAILED_ERROR: the message consumer has not been able to bind to the destination
  • MessageConsumerEventName.DOWN: the message consumer has been disconnected.
// Define message consumer event listeners
consumer.messageConsumer.on(solace.MessageConsumerEventName.UP, function () {
    consumer.consuming = true;
    consumer.log('=== Ready to receive messages. ===');
consumer.messageConsumer.on(solace.MessageConsumerEventName.CONNECT_FAILED_ERROR, function () {
    consumer.consuming = false;
    consumer.log('=== Error: the message consumer could not bind to queue "' + consumer.queueName +
        '" ===\n   Ensure this queue exists on the message router vpn');
consumer.messageConsumer.on(solace.MessageConsumerEventName.DOWN, function () {
    consumer.consuming = false;
    consumer.log('=== An error happened, the message consumer is down ===');

Message Consumer Message Received Event

Message received events will be sent to the message received event listener defined for the message consumer. Successful processing of a message must be explicitly acknowledged because "client acknowledgement mode" is used:

// Define message received event listener
consumer.messageConsumer.on(solace.MessageConsumerEventName.MESSAGE, function (message) {
    consumer.log('Received message: "' + message.getBinaryAttachment() + '",' +
        ' details:\n' + message.dump());
    // Need to explicitly ack otherwise it will not be deleted from the message router


Combining the example source code shown above results in the following source code files:

Learn how to verify all messages arrive to the Solace message router in our next tutorial, Confirmed Delivery.

Getting the Source

Clone the GitHub repository containing the Solace samples.

git clone
cd solace-samples-javascript

Note: the code in the master branch of this repository depends on Solace JavaScript API version 10 or later. If you want to work with an older version clone the branch that corresponds your version.

Installing the Web Messaging API for JavaScript

It is assumed that the lib directory containing the API libraries will be installed at the root of the cloned solace-samples-javascript repository:

cp -R <path_to_unzipped_API_distribution_package>/lib/ .

Running the Samples

The samples consist of two separate producer and consumer browser applications, each comes as a pair: one HTML file and one JavaScript file that is loaded by the HTML file.

Sample Output

First open src/features/QueueConsumer/QueueConsumer.html page in the browser and connect to a Solace router by specifying the message router properties and clicking "Connect" button.

Then bind to the destination queue by clicking the "Consume messages" button.

The following is a screenshot of the tutorial’s QueueConsumer.html web page with the JavaScript debug console open in the Firefox browser. It captures the page after it was loaded and the "Connect" button was clicked and then the "Consume messages" button was clicked.

Screenshot: Queue Consumer

Now, open src/features/QueueProducer/QueueProducer.html page in the browser and connect to the same Solace router by specifying the message router properties and clicking "Connect" button.

Send messages by clicking the "Send Message" button on the page.

The following screenshots of the tutorial’s QueueProducer.html and QueueConsumer.html web pages with the JavaScript debug console open in the Firefox browser. It captures the pages after a message was sent and received.

This is the producer is sending a message (QueueProducer.html):

Screenshot: Queue Producer

This is the consumer is receiving a message (QueueConsumer.html):

Screenshot: Queue Consumer

You have now successfully connected a client, sent guaranteed messages to a queue and received them from a message consumer.

Spraint is the proper name for otter dung